CASTLE EURO Installationshandbuch PDF herunterladen (Seite 46)

EURO Programming Manual

Page: 46 RINS1291-3

4.19.3 Fault Codes

Fault codes shown in the system log include numeric code to identify the equipment at which

the fault is present. For example:

Device Failure 203

Mains Failure 400

The first digit identifies the type of device:

1 = Control Panel

2 = Keypad

3 = Tag Reader or External Proximity Reader

4 = Zone Expander Module (ZEM)

5 = Output Module

The remaining digits identify the address of the device, so if the display showed “Device Failure

203”, then there would be a possible wiring fault on the keypad that is addressed as “03”. If

the display showed “Mains Failure 400”, then the power supply fitted to the ZEM addressed as

“00” needs to be checked.

Please note a list of all the fault codes and log meanings are shown on page: 62.

Review Logs

Using the and keys, scroll to

‘REVIEW LOGS?’

Press the key

Panel Log

Press the key to view the panel log.

You will be returned to the Engineer Menu.

The log will be displayed. Use the and

keys to scroll through the log.

For more information on an event (such

as alarm silenced for example) press the

 key.

When you wish to exit, press the key.

Access Log*

Repeat the above for the Access log. When

you wish to exit, press the  key. You will

be returned to the Engineer Menu.

*Not available on the EURO 28

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 67 68

Keine Kommentare

CASTLE EURO Installationshandbuch Seite 46