CASTLE, INC MORTISE MACHINE MODEL TSM-20 OPERATOR’S MANUAL Revised: October 2, 2010
TSM-20 Operator’s Manual Page ii CASTLE, INC. MORTISE MACHINE MODEL TSM-20 OPERATOR'S MANUAL TABLE OF CONTENTS Page # 1.0 GETTING S
TSM-20 Operator’s Manual 1 1.0 GETTING STARTED 1.1 Warning The Castle Tool Mortise Machine was designed with operator safety as a priority.
TSM-20 Operator’s Manual 2 2.2 Control Panel/Limit Switches The control panel is the box that is mounted on the left side of the machine, when
TSM-20 Operator’s Manual 3 3.0.3 Place the foot switch in front of the machine in an accessible, safe location. 3.0.4 Connect the machine to a
TSM-20 Operator’s Manual 4 4.2.1.6 Check that the drill bit is centered on the hole in the face of the machine and that there are no interferen
TSM-20 Operator’s Manual 5 5.2.2.4 Replace the drill bit in accordance with the Porter-Cable instruction manual with the following exceptions.
Kommentare zu diesen Handbüchern